Quick answer:
The deck belt size found is 80 in (2,032 mm) long by 0.5 in (13 mm) wide. The drive belt part number found is 754-05027.
Deck belt sizelength 80 in (2,032 mm) and width 0.5 in (13 mm)
Drive belt part #754-05027
Cub Cadet 1610 Belt Size and Part Numbers
| Mower deck belt length | 80 in (2,032 mm) |
|---|---|
| Mower deck belt width | 0.5 in (13 mm) |
| Drive belt part number | 754-05027 |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Cub Cadet 1610 Belt Notes
| Mower deck belt note | The Cub Cadet 1610 deck belt measurement captured here is length 80 in (2,032 mm) and width 0.5 in (13 mm). Match the old belt, deck size and routing before spending money |
|---|---|
| Drive belt note | The Cub Cadet 1610 drive or transmission belt part number captured here is 754-05027. Do not mix it up with the deck belt because the routing and job are different |
| Fitment note | For the Cub Cadet 1610, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or belt label before spending money |
Cub Cadet 1610 Belt Size FAQ
Why can the correct Cub Cadet 1610 deck belt still slip?
The deck belt length found is 80 in (2,032 mm). Even with the right length, a weak idler spring, worn pulley groove or wrong belt path can make it slip. The part number and routing matter together
Why does 0.5 in (13 mm) belt width matter on the Cub Cadet 1610?
The captured deck belt width is 0.5 in (13 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
