The Cub Cadet Z-Force S46 coolant capacity is listed as 0.93 gal (3.5 L). It also lists coolant type ethylene glycol-based coolant and antifreeze mix 50/50 coolant and water mix.
Coolant capacity0.93 gal (3.5 L)
Coolant typeethylene glycol-based coolant
Antifreeze mix50/50 coolant and water mix
Cub Cadet Z-Force S46 Coolant Capacity
Coolant capacity
0.9 gal (3.4 L)
Cooling system capacity
0.93 gal (3.5 L)
Radiator capacity
0.93 gal (3.5 L)
Coolant type
ethylene glycol-based coolant
Antifreeze mix
50/50 coolant and water mix
Engine horsepower
22 hp (16.4 kW)
Engine displacement
0.7 L (44.5 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
0.93 gal
Average
1 gal
Low
0.5 gal
High
2 gal
Engine horsepower comparison
This model
22 hp
Average
18 hp
Low
10 hp
High
30 hp
Engine displacement comparison
This model
0.7 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Cub Cadet Z-Force S46 Coolant and Engine Notes
Coolant capacity note
For service planning, the Cub Cadet Z-Force S46 should be treated as 0.93 gal (3.5 L) coolant capacity. That is a smaller cooling system where using the exact fill amount matters
Radiator capacity note
Radiator capacity is listed as 0.93 gal (3.5 L). The full cooling system can be higher because coolant also sits in the engine and hoses
Coolant type note
The captured coolant type for the Cub Cadet Z-Force S46 is ethylene glycol-based coolant. Do not mix unknown coolant types unless the label and manual say they are compatible
Antifreeze mix note
The 50/50 coolant and water mix mix gives the Cub Cadet Z-Force S46 coolant system a sensible balance of freeze protection, boil protection and corrosion protection
Engine context note
The Cub Cadet Z-Force S46 engine data captured here is engine horsepower 22 hp (16.4 kW) and displacement 0.7 L (44.5 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
For a coolant change on the Cub Cadet Z-Force S46, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed
Cub Cadet Z-Force S46 Coolant Capacity FAQ
What is the Cub Cadet Z-Force S46 coolant capacity?
The Cub Cadet Z-Force S46 coolant capacity is listed as 0.93 gal (3.5 L) for cooling system capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Cub Cadet Z-Force S46?
No. Use ethylene glycol-based coolant or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Cub Cadet Z-Force S46?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and the required mix. The captured mix for the Cub Cadet Z-Force S46 is 50/50 coolant and water mix.
How often should I change coolant in the Cub Cadet Z-Force S46?
The captured coolant change interval for the Cub Cadet Z-Force S46 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
Why does the Cub Cadet Z-Force S46 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Cub Cadet Z-Force S46, the supporting engine data is horsepower 22 hp (16.4 kW) and displacement 0.7 L (44.5 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official cubcadet.com website for official information before draining or refilling the cooling system.
