The Cub Cadet LT 1024 coolant capacity is listed as 0.92 gal (3.5 L). It also lists coolant type ethylene glycol-based coolant and antifreeze mix 50/50 coolant and water mix.
Coolant capacity0.92 gal (3.5 L)
Coolant typeethylene glycol-based coolant
Antifreeze mix50/50 coolant and water mix
Cub Cadet LT 1024 Coolant Capacity
Coolant capacity
0.88 gal (3.3 L)
Cooling system capacity
0.92 gal (3.5 L)
Radiator capacity
0.88 gal (3.3 L)
Coolant type
ethylene glycol-based coolant
Antifreeze mix
50/50 coolant and water mix
Engine horsepower
24 hp (17.9 kW)
Engine displacement
0.7 L (44.2 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
0.92 gal
Average
1 gal
Low
0.5 gal
High
2 gal
Engine horsepower comparison
This model
24 hp
Average
18 hp
Low
10 hp
High
30 hp
Engine displacement comparison
This model
0.7 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Cub Cadet LT 1024 Coolant and Engine Notes
Coolant capacity note
For service planning, the Cub Cadet LT 1024 should be treated as 0.92 gal (3.5 L) coolant capacity. That is a smaller cooling system where using the exact fill amount matters
Radiator capacity note
For the Cub Cadet LT 1024, the captured radiator capacity is 0.88 gal (3.3 L). If you are doing a full drain, check the full cooling-system capacity too
Coolant type note
The captured coolant type for the Cub Cadet LT 1024 is ethylene glycol-based coolant. Do not mix unknown coolant types unless the label and manual say they are compatible
Antifreeze mix note
For the Cub Cadet LT 1024, the captured mix is 50/50 coolant and water mix. Straight water is not the right long-term answer unless you are only flushing the system
Engine context note
Engine context for the Cub Cadet LT 1024: engine horsepower 24 hp (17.9 kW) and displacement 0.7 L (44.2 cu in). Engine size helps explain why coolant capacity changes between models
Refill note
For a coolant change on the Cub Cadet LT 1024, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed
Cub Cadet LT 1024 Coolant Capacity FAQ
How much coolant does the Cub Cadet LT 1024 take?
The main coolant amount captured for the Cub Cadet LT 1024 is 0.92 gal (3.5 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Cub Cadet LT 1024?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Cub Cadet LT 1024, the captured coolant type is ethylene glycol-based coolant.
What antifreeze mix does the Cub Cadet LT 1024 use?
The captured antifreeze mix for the Cub Cadet LT 1024 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Cub Cadet LT 1024 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
What engine specs affect Cub Cadet LT 1024 coolant capacity?
The captured engine context is horsepower 24 hp (17.9 kW) and displacement 0.7 L (44.2 cu in). Engine size is one reason coolant capacity changes between tractors.
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official cubcadet.com website for official information before draining or refilling the cooling system.
