The Cub Cadet GTX 1054 coolant capacity is listed as 0.48 gal (1.8 L). It also lists coolant type ethylene glycol-based coolant and antifreeze mix 50/50 coolant and water mix.
Coolant capacity0.48 gal (1.8 L)
Coolant typeethylene glycol-based coolant
Antifreeze mix50/50 coolant and water mix
Cub Cadet GTX 1054 Coolant Capacity
Coolant capacity
0.48 gal (1.8 L)
Cooling system capacity
0.48 gal (1.8 L)
Radiator capacity
0.48 gal (1.8 L)
Coolant type
ethylene glycol-based coolant
Antifreeze mix
50/50 coolant and water mix
Engine horsepower
27 hp (20.1 kW)
Engine displacement
0.7 L (44.2 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
0.48 gal
Average
1 gal
Low
0.5 gal
High
2 gal
Engine horsepower comparison
This model
27 hp
Average
35 hp
Low
20 hp
High
60 hp
Engine displacement comparison
This model
0.7 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Cub Cadet GTX 1054 Coolant and Engine Notes
Coolant capacity note
The headline cooling-system number for the Cub Cadet GTX 1054 is 0.48 gal (1.8 L). Buy enough coolant before opening the drain plug
Radiator capacity note
The Cub Cadet GTX 1054 radiator figure is 0.48 gal (1.8 L). Treat it as radiator context, not always the complete refill amount
Coolant type note
Use the right coolant formula for the Cub Cadet GTX 1054: ethylene glycol-based coolant. Cheap wrong coolant is not a smart saving if it causes corrosion or deposits
Antifreeze mix note
The Cub Cadet GTX 1054 antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control
Engine context note
For the Cub Cadet GTX 1054, the supporting engine specs are engine horsepower 27 hp (20.1 kW) and displacement 0.7 L (44.2 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual
Refill note
Coolant changes are simple but easy to do sloppily. On the Cub Cadet GTX 1054, plan around 0.48 gal (1.8 L) and confirm the final level after air works out of the system
Cub Cadet GTX 1054 Coolant Capacity FAQ
What is the cooling system capacity of the Cub Cadet GTX 1054?
The Cub Cadet GTX 1054 cooling system capacity is shown as 0.48 gal (1.8 L). That is the number to use before draining the system.
What coolant type should I use in the Cub Cadet GTX 1054?
Use ethylene glycol-based coolant. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Cub Cadet GTX 1054?
Not for normal long-term use. The Cub Cadet GTX 1054 should use 50/50 coolant and water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Cub Cadet GTX 1054?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Cub Cadet GTX 1054 is the service interval in the operator manual.
What engine specs affect Cub Cadet GTX 1054 coolant capacity?
The captured engine context is horsepower 27 hp (20.1 kW) and displacement 0.7 L (44.2 cu in). Engine size is one reason coolant capacity changes between tractors.
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official cubcadet.com website for official information before draining or refilling the cooling system.
