The Cub Cadet 800 coolant capacity is listed as 0.63 gal (2.4 L). It also lists coolant type ethylene glycol-based coolant and antifreeze mix 50/50 coolant and water mix.
Coolant capacity0.63 gal (2.4 L)
Coolant typeethylene glycol-based coolant
Antifreeze mix50/50 coolant and water mix
Cub Cadet 800 Coolant Capacity
Coolant capacity
0.63 gal (2.4 L)
Coolant type
ethylene glycol-based coolant
Antifreeze mix
50/50 coolant and water mix
Engine horsepower
8 hp (6 kW)
Engine displacement
0.3 L (18.6 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
0.63 gal
Average
1 gal
Low
0.5 gal
High
2 gal
Engine horsepower comparison
This model
8 hp
Average
18 hp
Low
10 hp
High
30 hp
Engine displacement comparison
This model
0.3 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Cub Cadet 800 Coolant and Engine Notes
Coolant capacity note
The headline cooling-system number for the Cub Cadet 800 is 0.63 gal (2.4 L). Buy enough coolant before opening the drain plug
Coolant type note
For the Cub Cadet 800, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant
Antifreeze mix note
The 50/50 coolant and water mix mix gives the Cub Cadet 800 coolant system a sensible balance of freeze protection, boil protection and corrosion protection
Engine context note
The Cub Cadet 800 engine data captured here is engine horsepower 8 hp (6 kW) and displacement 0.3 L (18.6 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
The practical service move for the Cub Cadet 800: buy enough coolant for 0.63 gal (2.4 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling
Cub Cadet 800 Coolant Capacity FAQ
How much coolant does the Cub Cadet 800 take?
The main coolant amount captured for the Cub Cadet 800 is 0.63 gal (2.4 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Cub Cadet 800?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Cub Cadet 800, the captured coolant type is ethylene glycol-based coolant.
What antifreeze mix does the Cub Cadet 800 use?
The captured antifreeze mix for the Cub Cadet 800 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Cub Cadet 800 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
Why does the Cub Cadet 800 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Cub Cadet 800, the supporting engine data is horsepower 8 hp (6 kW) and displacement 0.3 L (18.6 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official cubcadet.com website for official information before draining or refilling the cooling system.
