The Kubota MR87 coolant capacity is listed as 2.17 gal (8.2 L). It also lists coolant type ethylene glycol-based coolant and antifreeze mix 50/50 coolant and water mix.
Coolant capacity2.17 gal (8.2 L)
Coolant typeethylene glycol-based coolant
Antifreeze mix50/50 coolant and water mix
Kubota MR87 Coolant Capacity
Coolant capacity
2.17 gal (8.2 L)
Cooling system capacity
2.17 gal (8.2 L)
Radiator capacity
2.17 gal (8.2 L)
Coolant type
ethylene glycol-based coolant
Antifreeze mix
50/50 coolant and water mix
Engine horsepower
85.8 hp (64 kW)
Engine displacement
3.8 L (231.9 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
2.17 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine horsepower comparison
This model
86 hp
Average
75 hp
Low
40 hp
High
125 hp
Engine displacement comparison
This model
3.8 L
Average
3.5 L
Low
1.8 L
High
6 L
Kubota MR87 Coolant and Engine Notes
Coolant capacity note
For the Kubota MR87, 2.17 gal (8.2 L) is the main coolant capacity captured. Use it as a refill planning number, then confirm the final level at the machine
Radiator capacity note
Radiator capacity is listed as 2.17 gal (8.2 L). The full cooling system can be higher because coolant also sits in the engine and hoses
Coolant type note
Use the right coolant formula for the Kubota MR87: ethylene glycol-based coolant. Cheap wrong coolant is not a smart saving if it causes corrosion or deposits
Antifreeze mix note
The 50/50 coolant and water mix mix gives the Kubota MR87 coolant system a sensible balance of freeze protection, boil protection and corrosion protection
Engine context note
The Kubota MR87 engine data captured here is engine horsepower 85.8 hp (64 kW) and displacement 3.8 L (231.9 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
Coolant changes are simple but easy to do sloppily. On the Kubota MR87, plan around 2.17 gal (8.2 L) and confirm the final level after air works out of the system
Kubota MR87 Coolant Capacity FAQ
What is the Kubota MR87 coolant capacity?
The Kubota MR87 coolant capacity is listed as 2.17 gal (8.2 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota MR87?
No. Use ethylene glycol-based coolant or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota MR87?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and the required mix. The captured mix for the Kubota MR87 is 50/50 coolant and water mix.
How often should I change coolant in the Kubota MR87?
The captured coolant change interval for the Kubota MR87 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
Why does the Kubota MR87 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota MR87, the supporting engine data is horsepower 85.8 hp (64 kW) and displacement 3.8 L (231.9 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
