The Kubota L6070 coolant capacity is listed as 3.3 gal (12.5 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and distilled water mix.
Kubota L6070 Coolant Capacity
| Cooling system capacity | 3.3 gal (12.5 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and distilled water mix |
| Engine model | V2403-CR-TIE5 |
| Engine horsepower | 60 hp (44.7 kW) |
| Engine displacement | 2.4 L (148.5 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota L6070 Coolant and Engine Notes
| Coolant capacity note | The Kubota L6070’s key coolant figure here is 3.3 gal (12.5 L) for cooling system capacity. Use that before buying coolant or draining the system |
|---|---|
| Coolant type note | For the Kubota L6070, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix note | For the Kubota L6070, the captured mix is 50/50 coolant and distilled water mix. Straight water is not the right long-term answer unless you are only flushing the system |
| Engine context note | Engine context for the Kubota L6070: engine model V2403-CR-TIE5, engine horsepower 60 hp (44.7 kW), and displacement 2.4 L (148.5 cu in). Engine size helps explain why coolant capacity changes between models |
| Refill note | The practical service move for the Kubota L6070: buy enough coolant for 3.3 gal (12.5 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota L6070 Coolant Capacity FAQ
What is the cooling system capacity of the Kubota L6070?
The Kubota L6070 cooling system capacity is shown as 3.3 gal (12.5 L). That is the number to use before draining the system.
What coolant type should I use in the Kubota L6070?
Use ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Kubota L6070?
Not for normal long-term use. The Kubota L6070 should use 50/50 coolant and distilled water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Kubota L6070?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Kubota L6070 is the service interval in the operator manual.
Why does the Kubota L6070 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota L6070, the supporting engine data is engine model V2403-CR-TIE5, horsepower 60 hp (44.7 kW), and displacement 2.4 L (148.5 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
