The Kubota L4150 coolant capacity is listed as 2.17 gal (8.2 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and distilled water mix.
Coolant capacity2.17 gal (8.2 L)
Coolant typeethylene glycol-based coolant and ASTM D3306 compatible
Antifreeze mix50/50 coolant and distilled water mix
Change intervalevery 500 hours
Kubota L4150 Coolant Capacity
Cooling system capacity
2.17 gal (8.2 L)
Coolant type
ethylene glycol-based coolant and ASTM D3306 compatible
Antifreeze mix
50/50 coolant and distilled water mix
Coolant change interval
every 500 hours
Engine horsepower
50 hp (37.3 kW)
Engine displacement
2.3 L (140.4 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
2.17 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine horsepower comparison
This model
50 hp
Average
75 hp
Low
40 hp
High
125 hp
Engine displacement comparison
This model
2.3 L
Average
1.7 L
Low
0.9 L
High
3 L
Kubota L4150 Coolant and Engine Notes
Coolant capacity note
The headline cooling-system number for the Kubota L4150 is 2.17 gal (8.2 L). Buy enough coolant before opening the drain plug
Coolant type note
Use the right coolant formula for the Kubota L4150: ethylene glycol-based coolant and ASTM D3306 compatible. Cheap wrong coolant is not a smart saving if it causes corrosion or deposits
Antifreeze mix note
For the Kubota L4150, the captured mix is 50/50 coolant and distilled water mix. Straight water is not the right long-term answer unless you are only flushing the system
Coolant change interval note
Coolant service for the Kubota L4150 is listed as every 500 hours. If the service history is unknown, a fresh drain and refill is usually the cleaner move
Engine context note
Engine context for the Kubota L4150: engine horsepower 50 hp (37.3 kW) and displacement 2.3 L (140.4 cu in). Engine size helps explain why coolant capacity changes between models
Refill note
Coolant changes are simple but easy to do sloppily. On the Kubota L4150, plan around 2.17 gal (8.2 L) and confirm the final level after air works out of the system
Kubota L4150 Coolant Capacity FAQ
How much coolant does the Kubota L4150 take?
The main coolant amount captured for the Kubota L4150 is 2.17 gal (8.2 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota L4150?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota L4150, the captured coolant type is ethylene glycol-based coolant and ASTM D3306 compatible.
What antifreeze mix does the Kubota L4150 use?
The captured antifreeze mix for the Kubota L4150 is 50/50 coolant and distilled water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota L4150 coolant be replaced?
Use every 500 hours as the service guide. Coolant can look okay but still lose corrosion protection over time.
Why does the Kubota L4150 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota L4150, the supporting engine data is horsepower 50 hp (37.3 kW) and displacement 2.3 L (140.4 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
