The Kubota L3200 coolant capacity is listed as 1.59 gal (6 L). It also lists coolant type ethylene glycol-based coolant and Kubota Genuine Coolant and antifreeze mix 50/50 coolant and water mix.
Coolant capacity1.59 gal (6 L)
Coolant typeethylene glycol-based coolant and Kubota Genuine Coolant
Antifreeze mix50/50 coolant and water mix
Kubota L3200 Coolant Capacity
Coolant capacity
1.59 gal (6 L)
Cooling system capacity
1.59 gal (6 L)
Radiator capacity
1.59 gal (6 L)
Coolant type
ethylene glycol-based coolant and Kubota Genuine Coolant
Antifreeze mix
50/50 coolant and water mix
Engine horsepower
31.9 hp (23.8 kW)
Engine displacement
1.5 L (91.5 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
1.59 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine horsepower comparison
This model
32 hp
Average
35 hp
Low
20 hp
High
60 hp
Engine displacement comparison
This model
1.5 L
Average
1.7 L
Low
0.9 L
High
3 L
Kubota L3200 Coolant and Engine Notes
Coolant capacity note
The headline cooling-system number for the Kubota L3200 is 1.59 gal (6 L). Buy enough coolant before opening the drain plug
Radiator capacity note
Radiator capacity is listed as 1.59 gal (6 L). The full cooling system can be higher because coolant also sits in the engine and hoses
Coolant type note
For the Kubota L3200, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant and Kubota Genuine Coolant
Antifreeze mix note
The 50/50 coolant and water mix mix gives the Kubota L3200 coolant system a sensible balance of freeze protection, boil protection and corrosion protection
Engine context note
The Kubota L3200 engine data captured here is engine horsepower 31.9 hp (23.8 kW) and displacement 1.5 L (91.5 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
The practical service move for the Kubota L3200: buy enough coolant for 1.59 gal (6 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling
Kubota L3200 Coolant Capacity FAQ
What is the Kubota L3200 coolant capacity?
The Kubota L3200 coolant capacity is listed as 1.59 gal (6 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota L3200?
No. Use ethylene glycol-based coolant and Kubota Genuine Coolant or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota L3200?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and Kubota Genuine Coolant and the required mix. The captured mix for the Kubota L3200 is 50/50 coolant and water mix.
How often should I change coolant in the Kubota L3200?
The captured coolant change interval for the Kubota L3200 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
Why does the Kubota L3200 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota L3200, the supporting engine data is horsepower 31.9 hp (23.8 kW) and displacement 1.5 L (91.5 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
