The Kubota KL38 coolant capacity is listed as 2.17 gal (8.2 L). It also lists coolant type ethylene glycol-based coolant and Kubota Genuine Coolant and antifreeze mix 50/50 coolant and water mix.
Kubota KL38 Coolant Capacity
| Coolant capacity | 2.17 gal (8.2 L) |
|---|---|
| Cooling system capacity | 2.17 gal (8.2 L) |
| Radiator capacity | 2.17 gal (8.2 L) |
| Coolant type | ethylene glycol-based coolant and Kubota Genuine Coolant |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine displacement | 2.2 L (134.3 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine displacement comparison
Kubota KL38 Coolant and Engine Notes
| Coolant capacity note | The headline cooling-system number for the Kubota KL38 is 2.17 gal (8.2 L). Buy enough coolant before opening the drain plug |
|---|---|
| Radiator capacity note | Radiator capacity is listed as 2.17 gal (8.2 L). The full cooling system can be higher because coolant also sits in the engine and hoses |
| Coolant type note | Use the right coolant formula for the Kubota KL38: ethylene glycol-based coolant and Kubota Genuine Coolant. Cheap wrong coolant is not a smart saving if it causes corrosion or deposits |
| Antifreeze mix note | The 50/50 coolant and water mix mix gives the Kubota KL38 coolant system a sensible balance of freeze protection, boil protection and corrosion protection |
| Engine context note | The Kubota KL38 engine data captured here is displacement 2.2 L (134.3 cu in). Bigger engines usually need more coolant and more careful refill bleeding |
| Refill note | Coolant changes are simple but easy to do sloppily. On the Kubota KL38, plan around 2.17 gal (8.2 L) and confirm the final level after air works out of the system |
Kubota KL38 Coolant Capacity FAQ
What is the Kubota KL38 coolant capacity?
The Kubota KL38 coolant capacity is listed as 2.17 gal (8.2 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota KL38?
No. Use ethylene glycol-based coolant and Kubota Genuine Coolant or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota KL38?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and Kubota Genuine Coolant and the required mix. The captured mix for the Kubota KL38 is 50/50 coolant and water mix.
How often should I change coolant in the Kubota KL38?
The captured coolant change interval for the Kubota KL38 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
Why does the Kubota KL38 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota KL38, the supporting engine data is displacement 2.2 L (134.3 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
