The Kubota B1410 coolant capacity is listed as 1.66 gal (6.3 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota B1410 Coolant Capacity
| Coolant capacity | 1.65 gal (6.2 L) |
|---|---|
| Cooling system capacity | 1.66 gal (6.3 L) |
| Radiator capacity | 1.65 gal (6.2 L) |
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Coolant change interval | every 2 years and every 1,500 hours |
| Engine model | D1402 |
| Engine horsepower | 13 hp (9.7 kW) |
| Engine displacement | 0.7 L (42.7 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota B1410 Coolant and Engine Notes
| Coolant capacity note | The Kubota B1410 coolant spec points to 1.66 gal (6.3 L). Do not rely on the radiator-only amount if the full cooling-system capacity is available |
|---|---|
| Radiator capacity note | Radiator capacity is listed as 1.65 gal (6.2 L). The full cooling system can be higher because coolant also sits in the engine and hoses |
| Coolant type note | The captured coolant type for the Kubota B1410 is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. Do not mix unknown coolant types unless the label and manual say they are compatible |
| Antifreeze mix note | The 50/50 coolant and water mix mix gives the Kubota B1410 coolant system a sensible balance of freeze protection, boil protection and corrosion protection |
| Coolant change interval note | The captured coolant change interval for the Kubota B1410 is every 2 years and every 1,500 hours. Old coolant can lose corrosion protection even if the tractor still runs cool |
| Engine context note | The Kubota B1410 engine data captured here is engine model D1402, engine horsepower 13 hp (9.7 kW), and displacement 0.7 L (42.7 cu in). Bigger engines usually need more coolant and more careful refill bleeding |
| Refill note | For a coolant change on the Kubota B1410, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed |
Kubota B1410 Coolant Capacity FAQ
What is the cooling system capacity of the Kubota B1410?
The Kubota B1410 cooling system capacity is shown as 1.66 gal (6.3 L). That is the number to use before draining the system.
What coolant type should I use in the Kubota B1410?
Use ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Kubota B1410?
Not for normal long-term use. The Kubota B1410 should use 50/50 coolant and water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Kubota B1410?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Kubota B1410 is every 2 years and every 1,500 hours.
What engine specs affect Kubota B1410 coolant capacity?
The captured engine context is engine model D1402, horsepower 13 hp (9.7 kW), and displacement 0.7 L (42.7 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
