The Kubota MX4700 has a 3-point hitch lift capacity of 1,800 lb (816 kg) at 24 inches behind the link ends. It also lists hitch category Category 1 / Category 2 and hydraulic pump flow 9.5 gpm (36 L/min).
Best rear lift figure1,800 lb (816 kg)
Lift at 24 inches1,800 lb (816 kg)
Hitch categoryCategory 1 / Category 2
Kubota MX4700 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,870 lb (1,302 kg)
Lift capacity at 24 inches behind link ends
1,800 lb (816 kg)
Hitch category
Category 1 / Category 2
Hydraulic pump flow
9.5 gpm (36 L/min)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,800 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
1,800 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
9.5 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Kubota MX4700 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota MX4700 is 1,800 lb (816 kg) (lift at 24 inches behind the link ends). In plain terms, it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments
24-inch lift note
For the Kubota MX4700, the 1,800 lb (816 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
Hydraulic pump flow is listed as 9.5 gpm (36 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota MX4700’s lift capacity against gear like rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
Kubota MX4700 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota MX4700?
Rear lift capacity for the Kubota MX4700 is shown as 1,800 lb (816 kg) for lift at 24 inches behind the link ends. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota MX4700 is listed at 1,800 lb (816 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota MX4700?
Yes. The Kubota MX4700 is listed as Category 1 / Category 2, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota MX4700?
Start with 1,800 lb (816 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Does hydraulic pump flow matter for the Kubota MX4700?
Yes, but it is not the same as lift capacity. The Kubota MX4700 is listed at 9.5 gpm (36 L/min) hydraulic pump flow, while the rear lift number tells you what the hitch can raise.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
