The John Deere 6125E tractor hydraulic pump flow is 14.3 GPM, and hydraulic system pressure is 2,756 psi.
Hydraulic pump flow14.3 GPM
Implement flow14.3 GPM
Total hydraulic flow30 GPM
Hydraulic pressure2,756 psi
Hydraulic system typeopen-center
John Deere 6125E Hydraulic Flow Details
Hydraulic pump flow
14.3 GPM
Implement hydraulic flow
14.3 GPM
Total hydraulic flow
30 GPM
Hydraulic system pressure
2,756 psi
Hydraulic system type
open-center
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
14.3 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
14.3 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
30 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,756 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
John Deere 6125E Extra Hydraulic Notes
Hydraulic flow note
The John Deere 6125E’s total flow is higher than implement flow, so use the implement-flow number when matching hydraulic tools and SCV-driven equipment.
Hydraulic pressure note
Hydraulic pressure on the John Deere 6125E is 2,756 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (14.3 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6125E’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
