The John Deere 45R tractor hydraulic pump flow is 12 GPM, and hydraulic system pressure is 2,500 psi.
Hydraulic pump flow12 GPM
Implement flow35.3 GPM
Total hydraulic flow35.3 GPM
Hydraulic pressure2,500 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity23.5 qt (5.9 gal)
John Deere 45R Hydraulic Flow Details
Hydraulic pump flow
12 GPM
Implement hydraulic flow
35.3 GPM
Total hydraulic flow
35.3 GPM
Hydraulic system pressure
2,500 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
23.5 qt (5.9 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
12 GPM
Average
20.7 GPM
Low
3.7 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
35.3 GPM
Average
21.2 GPM
Low
3.7 GPM
High
110 GPM
Total hydraulic flow comparison
This model
35.3 GPM
Average
19.9 GPM
Low
3.7 GPM
High
55 GPM
Hydraulic pressure comparison
This model
2,500 psi
Average
2,198.4 psi
Low
700 psi
High
4,200 psi
Hydraulic fluid capacity comparison
This model
5.9 gal
Average
12.1 gal
Low
1.2 gal
High
55 gal
John Deere 45R Extra Hydraulic Notes
Hydraulic flow note
With about 35.3 GPM implement flow, the John Deere 45R sits in the high-flow row-crop hydraulic range and is best suited to multiple SCVs, larger implements and heavier hydraulic demand.
Hydraulic pressure note
At 2,500 psi, the John Deere 45R’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (35.3 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 45R’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 45R is 23.5 qt (5.9 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
