The John Deere 57 tractor hydraulic pump flow is 14.8 GPM, and hydraulic system pressure is 1,000 psi.
Hydraulic pump flow14.8 GPM
Implement flow14.8 GPM
Total hydraulic flow14.8 GPM
Hydraulic pressure1,000 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity13.8 gal
John Deere 57 Hydraulic Flow Details
Hydraulic pump flow
14.8 GPM
Implement hydraulic flow
14.8 GPM
Total hydraulic flow
14.8 GPM
Hydraulic system pressure
1,000 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
13.8 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
14.8 GPM
Average
37.8 GPM
Low
3.3 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
14.8 GPM
Average
37.9 GPM
Low
3.3 GPM
High
110 GPM
Total hydraulic flow comparison
This model
14.8 GPM
Average
38.2 GPM
Low
3.3 GPM
High
85 GPM
Hydraulic pressure comparison
This model
1,000 psi
Average
2,672.7 psi
Low
610 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
13.8 gal
Average
28.5 gal
Low
0.9 gal
High
84 gal
John Deere 57 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 57’s implement flow figure is about 14.8 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
The John Deere 57’s hydraulic pressure is listed at 1,000 psi, which is lower-pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (14.8 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 57’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
For maintenance, the John Deere 57’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
