The John Deere 8RX 540 tractor hydraulic pump flow is 84 GPM, and hydraulic system pressure is 3,000 psi.
Hydraulic pump flow84 GPM
Implement flow84 GPM
Total hydraulic flow84 GPM
Hydraulic pressure3,000 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity84 gal
John Deere 8RX 540 Hydraulic Flow Details
Hydraulic pump flow
84 GPM
Implement hydraulic flow
84 GPM
Total hydraulic flow
84 GPM
Hydraulic system pressure
3,000 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
84 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
84 GPM
Average
37.8 GPM
Low
3.3 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
84 GPM
Average
37.9 GPM
Low
3.3 GPM
High
110 GPM
Total hydraulic flow comparison
This model
84 GPM
Average
38.2 GPM
Low
3.3 GPM
High
85 GPM
Hydraulic pressure comparison
This model
3,000 psi
Average
2,672.7 psi
Low
610 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
84 gal
Average
28.5 gal
Low
0.9 gal
High
84 gal
John Deere 8RX 540 Extra Hydraulic Notes
Hydraulic flow note
With about 84 GPM implement flow, the John Deere 8RX 540 sits in the very high-flow hydraulic range and is best suited to large hydraulic implements and high-demand farm equipment where SCV flow matters.
Hydraulic pressure note
The John Deere 8RX 540’s hydraulic pressure is listed at 3,000 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (84 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 8RX 540 uses a closed-center pressure-flow compensated hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 8RX 540 is 84 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
